Friday, May 18, 2012

Boss LM-2 Limiter Instructions Manual and Product Specifications


Boss LM-2 Limiter Instructions Manual stated that this pedal unit suppresses the peak of the input signal, retaining a certain dynamic range. Adopting a high quality VCA, the LM-2 allows little tone quality feterioration and low noise. The high speed envelope detecting circuits enable natural limiting effect, and provided with the Tone Control, the LM-2 can create wide variety of sounds.

Boss LM-2 Limiter Product Specifications
Power
9V DC 006P (x1), AC Adaptor (ACA-120, 220 or 240)
Current Draw
12mA (9VDC)
Controls
Level, Tone, Release, Threshold
Switch
Effect On/Off
Indicator
Effect On/Off (=Battery Check)
Jacks
Input, Output, AC Adaptor
Residual Noise
Less than -100dBm (IHF-A)
(Level and Tone set to the center)
Input Impedance
1MW
Output Load Impedance
More than 10kW
Dimensions
(W) 70 x (H) 55 x (D) 125 mm
Weight
400g / 14oz

If you are looking for Boss LM-2 Limiter Instructions Manual, please download it from their official website that the link is below.


All information presented on this blog follow the contents from the official website or other websites (if not available on the official website) or pdf obtained at the time the information is uploaded to this blog. In this paper, there may be typographical errors. Therefore, you still have to refer to the information or specifications contained in the official website.

angribet.blogspot.com not responsible for any changes that occur in the information contained in this user guide or specification.

angribet.blogspot.com not received any complaints and free from any claims of any party upon the information contained in this blog.

Activity writes and uploads the information and all sources of information and links in this blog is a personal activity and hobbies. If you are the site owner or legally responsible for the information and links in this blog, please write an email to raicon.mayday at gmail.com subjected "Please Remove Links from angribet.blogspot.com".

No comments:

Post a Comment