Thursday, January 12, 2012

Mazda 1971-73 Wheel Alignment Repair Guide

1971-73 MAZDA SPECIFICATIONS AND ADJUSTMENTS

TIRE INFLATION (COLD)
Before attempting to check or adjust wheel alignment, ensure that tires are properly inflated.


CASTER
All Models Exc. B1600 - Caster is nonadjustable. If alignment is not within specifications, inspect for damaged parts and replace as necessary.

B1600 - To adjust, change shims between upper arm shaft and the support bracket or turn the upper arm shaft until specifications are obtained.

CAMBER
All Models Exc. B1600 - Camber is non adjustable. If alignment is not within specifications, inspect for damaged parts and replace as necessary.

B1600 - To adjust, change shims between upper arm shaft and the support bracket until specifications for camber are within limits.

TOE-IN
All Models - Position wheels to center position and loosen tie rod locking nuts at each end of tie rod. Check that tie rod ends are in the same position on each rod ensuring that the tie rods are the same length. Turn tie rods by equal amounts until the toe-in is within specifications. Tighten locking nuts.


No comments:

Post a Comment